UKM

Condensating panel type UKM

The unit is intended for use in industrial networks with a voltage of 0.4 kV to compensate for the reactive power of inductive power consumers with automatic power factor control.

Installation is intended for work in the enclosed space in the following conditions:

  • Temperature range from minus 25 °С to plus 40 °С;
  • Relative air humidity up to 80% at a temperature of 20 °С;
  • Height above sea level no more than 1000 m;
  • Environment is non-explosive, not containing current-carrying dust, corrosive gases and vapors in concentrations that destroy metals and insulation.

The installation does not allow long-term operation with an increase in the effective value of the current to 1.3 nominal, obtained both by increasing the voltage, and by higher harmonics, or both, regardless of the harmonic composition of the current.

Standard Designation Weight, kg Dimensions,
W x D x H, mm
Nominal power, kVAr Stage regulation, kVAr
UKM 58-0,4-300-25 UZ 200 600 х 600 х 1400 300 25
UKM 58-0,4-250-25 UZ 180 425 х 425 х 1640 250 25
UKM 58-0,4-250-50 UZ 250 50
UKM 58-0,4-225-25 UZ 225 25
UKM 58-0,4-200-25 UZ 150 425 х 425 х 1420 200 25
UKM 58-0,4-200-50 UZ 200 50
UKM 58-0,4-175-25 UZ 175 25
UKM 58-0,4-150-25 UZ 130 425 х 425 х 1200 150 25
UKM 58-0,4-125-25 UZ 125 25
UKM 58-0,4-112,5-12,5 UZ 112,5 12,5
UKM 58-0,4-75-25 UZ 110 425 x 425 х 980 75 25
UKM 58-0,4-100-50 UZ 100 50
UKM 58-0,4-100-12,5 UZ 100 12,5
UKM 58-0,4-75-25 UZ 60 440 х 270 700 mounted execution 75 25
UKM 58-0,4-50-25 UZ 50 25
UKM 58-0,4-62,5-12,5 UZ 62,5 12,5
UKM 58-0,4-50-12,5 UZ 50 12,5